4.5’x2.3′ 43″H – U Shape Reception Counter-U

4.5’x2.3′ 43″H U-Shape Reception Counter

These cubicles are primarily used for Administrators/Sales Managers/Team Groups

Fabric Colors: 1-part fabric color   | Check for Available Stock Colors

Table Colors |   Check for Available Stock Colors

Size:  4.5’x2.3′ 43″H   U Shape Reception Counter| For Projects: Any size could be manufactured

Alum Thickness: 2.48 “

Alum Color: RAL .7044

SHORT DESCRIPTION

Main Reception Counter that suits any corporation reception

LONG DESCRIPTION

1-The workstation consists of solid panels of 43 ” height. The total thickness of the workstations panels is 2.4 inch.

2- Top glass is 12“at the top of the panels.

3- The Alum thickness varies from 0.047 to 0.125 inch depending on the part.

4-The aluminum is powder coated with RAL  /7044

5-The panels are covered with modified Upholstery Fabric where it provides diversification of the sound signals (where it makes perfect for the call centers and open areas). In addition, the fabric is installed on a thin layer of sponges for sound absorption.

6-The tabletop is from particle boards / Chip Board 1 inch, and are machine laminated from both sides with anti-scratch melamine. The edges are covered with 0.078-inch P.V.C and installed through edge lamination machines. Holes for cables with plastic cover are drilled.

7- The cantilevers supporting items are powder-coated steel with 0.047- 0.078 inch

8-It has a fairly large space table to accommodate more than one PC and many open files and documents at the same time.

9- The bottom part has a track for electrical wiring/however (for projects and special requirements) the track location could be manufactured to be in the top part above the table. With already punched location for the electrical/network sockets.

10- It accommodates having either one or two units of pedestals (as per request/ and additional cost) . Each pedestal has 3 drawers (please check the shapes we have in stock).

11-The unit is totally a knockdown system and it can easily be dismantled and re-located and re-installed.

12-All you need to install/dismantle is a normal drill.

13-It takes 15 minutes in installation and does not need any skills.

14- We have the capacity to produce any panel/ any accessory to accommodate any change in the workstation design to accommodate any future changes in the layout.

15- The products are guaranteed lifetime against manufacturing defects for the first purchasing customer and as per the first billing address and contact details.